CCT LED Controller 2.4G RF Mi-Light PR2 2 in 1, 20A 960 W
2-in-1 LED controller on 2.4G RF for single-colour and CCT (tunable white) strips. 12–48 V DC, up to 20 A (960 W), 4096-level dimming. Mi-Light 2.4G remotes, app via a 2.4G gateway.
13,75 €/ pcnet
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
The Mi-Light (MiBoxer) PR2 is a CCT LED controller on 2.4G RF – a 2-in-1 unit for single-colour strips (dimming) and CCT strips (colour temperature), without Zigbee or WiFi. The output mode is switched with the button on the housing. Up to 20 A (960 W at 48 V) and smooth 4096-level dimming down to 0.1 % – no flicker. One remote can drive many controllers at the same time, which makes the PR2 a good fit for hotels and larger homes. The five-mode version of this series: the Mi-Light PR5 RGBW LED controller 2.4G RF; the Zigbee 3.0 counterpart: the PZ2 Zigbee CCT LED strip controller.
Ways to control it
- Mi-Light 2.4G RF remotes and wall panels – up to 30 m, zones and groups.
- App and voice – with a 2.4G gateway (WL-Box1 / WL-Box2): Tuya Smart / Smart Life, Alexa and Google.
Compatible remotes and panels (2.4G RF, purchased separately)
FUT007 single-colour/CCT remote, FUT006, B1 single-colour wall panel, T1 single-colour 230 V panel, B2 single-colour/CCT wall panel, T2 single-colour/CCT 230 V panel, K1 single-colour panel, FUT087 single-colour panel, S1-B / S1-W / S1-G and the WL-Box1 2.4G gateway. The controller relays the remote signal (another 30 m per device).
Technical data
- Model: Mi-Light / MiBoxer PR2 (2 in 1 LED Controller, 2.4GHz)
- Input voltage: 12–48 V DC
- Output current: 20 A max in total, up to 960 W (constant voltage)
- Output modes: single colour / CCT (dual white)
- Control: 2.4G RF, up to 30 m
- Dimming: 4096 levels, 0.1–100 %, logarithmic curve
- IP20, operating temperature −10…+40 °C
- Certificates: CE (EMC, LVD, RED), 5-year manufacturer warranty
Remotes and gateway are not included. Match the power supply to the strip voltage and total load – see the PDF manual below.
See also: Mi-Light PZ5 RGBW / RGB+CCT Zigbee 3.0 LED Controller 5 in 1, 20A, Drivers for LED strips
| Input voltage | 12V-48V DC |
|---|---|
| Output power | 20A |
