Zigbee LED Strip Controller CCT Mi-Light PZ2 2 in 1, 20A
2-in-1 LED controller, Zigbee 3.0 + 2.4G, for single-colour and CCT (tunable white) strips. 12–48 V DC, up to 20 A. App via a Zigbee gateway, Mi-Light 2.4G remotes, PUSH button.
24,00 €/ pcnet
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
The Mi-Light (MiBoxer) PZ2 is a Zigbee LED strip controller for CCT and single-colour strips – a 2-in-1 unit on the Zigbee 3.0 standard with a 2.4G RF receiver. It drives single-colour strips (dimming) and CCT strips (tunable white); the output mode is switched with the SET button. Up to 20 A (10 A per channel) covers long strip runs without an amplifier. App control needs a Zigbee 3.0 gateway such as the ZB-Box2 wired Zigbee 3.0 gateway. It is the smaller sibling of the five-mode PZ5 Zigbee RGBW LED strip controller – for installations without colour strips.
Ways to control it
- App and voice – through a Zigbee 3.0 gateway (MiBoxer, Tuya Smart / Smart Life); once paired with a gateway, Alexa / Google voice control. Also works with Zigbee 3.0 ecosystems (Philips Hue, IKEA TRÅDFRI, Amazon Echo Plus).
- Mi-Light 2.4G RF remotes and wall panels – up to 30 m, single zone or groups.
- PUSH button – dimming and on/off with an ordinary momentary switch.
Compatible remotes and panels (2.4G RF, purchased separately)
FUT007 single-colour/CCT remote, FUT006, B1 single-colour wall panel, T1 single-colour 230 V panel, B2 single-colour/CCT wall panel, T2 single-colour/CCT 230 V panel, K1 single-colour panel, FUT087 single-colour panel, S1-B / S1-W / S1-G and the WL-Box1 2.4G gateway. The controller relays the remote signal (another 30 m per device) and synchronises settings between receivers.
Technical data
- Model: Mi-Light / MiBoxer PZ2 (2 in 1 LED Controller, Zigbee 3.0 + 2.4G)
- Input voltage: 12–48 V DC
- Output current: 10 A per channel, 20 A max in total
- Output modes: single colour / CCT (dual white)
- Communication: Zigbee 3.0 (IEEE 802.15.4, 2.400–2.480 GHz) + 2.4G RF
- Range: Zigbee up to 100 m open area, 2.4G remote up to 30 m
- Functions: dimming, colour temperature, auto-relay and synchronisation
- Operating temperature: −10…+40 °C
Zigbee gateway and remotes are not included. Match the power supply to the strip voltage and total load – see the PDF manual below.
See also: Mi-Light PZ5 RGBW / RGB+CCT Zigbee 3.0 LED Controller 5 in 1, 20A, Zigbee LED Strip Controllers
| Input voltage | 12V-48V DC |
|---|---|
| Output power | 20A |
