Matter LED Controller CCT Mi-Light SM2 2 in 1, 12A
Matter-certified (over WiFi) 2-in-1 LED controller + 2.4G RF for single-colour and CCT strips. QR-code pairing with Apple Home, Google Home, Alexa and SmartThings – no gateway. 12–24 V DC, up to 12 A.
15,50 €/ pcnet
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
The Mi-Light (MiBoxer) SM2 is a Matter LED controller for CCT and single-colour strips – a 2-in-1 unit certified for Matter over WiFi, the open smart-home standard that lets you add the device straight to Apple Home, Google Home, Amazon Alexa or Samsung SmartThings by scanning the QR code on the housing, with no gateway and no manufacturer app. It drives single-colour strips (dimming) and CCT strips (colour temperature), up to 12 A. The extra 2.4G RF receiver also accepts Mi-Light remotes and wall panels. Five-mode version (RGB, RGBW, RGB+CCT): the SM5 Matter RGB CCT LED controller; the non-Matter variant with the Tuya app: the PW2 WiFi LED controller.
Ways to control it
- Matter – Apple Home (Siri), Google Home, Alexa, SmartThings and other Matter platforms; scenes, automations, several platforms at once.
- Voice – Siri, Google Assistant, Alexa (through the Matter platform).
- Mi-Light 2.4G RF remotes and wall panels – up to 30 m, zones and groups.
Compatible remotes and panels (2.4G RF, purchased separately)
C1 CCT remote, C2, C3 CCT remote, FUT007 single-colour/CCT remote, FUT006, B1 single-colour wall panel, T1 single-colour 230 V panel, B2 single-colour/CCT wall panel, T2 single-colour/CCT 230 V panel, K1 single-colour panel, K2 single-colour/CCT panel, FUT087 single-colour panel, S1-B / S1-W / S1-G and the WL-Box2 gateway.
Technical data
- Model: Mi-Light / MiBoxer SM2 (2 in 1 Controller, Matter over WiFi + 2.4GHz)
- Input voltage: 12–24 V DC
- Output current: 12 A per channel, 12 A max in total (144 W at 12 V / 288 W at 24 V)
- Output modes: single colour / CCT
- Communication: WiFi IEEE 802.11 b/g/n 2.4 GHz (Matter) + 2.4G RF (remote range up to 30 m)
- IP20, operating temperature −10…+40 °C
- Certificates: Matter, CE (EMC, LVD, RED)
Matter needs the platform’s own hub (e.g. Apple TV / HomePod, Google Nest, Echo). Remotes are not included. Match the power supply to the strip voltage and total load – see the PDF manual below.
See also: Controller MI-LIGHT FUT035W+ – 2 in 1 WiFi MONO / CCT LED, Drivers for LED strips
| Input voltage | 12V-24V DC |
|---|---|
| Output power | 12A |
