WiFi LED Controller Tuya CCT Mi-Light PW2 2 in 1, 20A
2-in-1 LED controller, WiFi + Bluetooth + 2.4G, for single-colour and CCT strips. Tuya Smart app without a gateway, Alexa / Google voice, Mi-Light 2.4G remotes, PUSH button. 12–48 V DC, up to 20 A.
24,00 €/ pcnet
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
The Mi-Light (MiBoxer) PW2 is a WiFi LED controller for Tuya Smart – a 2-in-1 unit with WiFi, Bluetooth and a 2.4G RF receiver for single-colour strips (dimming) and CCT strips (colour temperature). It joins the home WiFi network directly, so phone control needs no gateway; when the router is down, the app controls it over Bluetooth at close range. Up to 20 A; the output mode is switched with the button on the housing. Counterparts on other standards: the PZ2 Zigbee 3.0 CCT LED strip controller and the SM2 Matter LED controller.
Ways to control it
- Tuya Smart / Smart Life app – dimming, scenes, groups, schedules, music mode, biorhythm; remote control over the internet.
- Voice – Amazon Alexa, Google Assistant.
- Mi-Light 2.4G RF remotes and wall panels – up to 30 m, zones and groups.
- PUSH button – dimming and on/off with an ordinary momentary switch.
Compatible remotes and panels (2.4G RF, purchased separately)
FUT007 single-colour/CCT remote, FUT006, B1 single-colour wall panel, T1 single-colour 230 V panel, B2 single-colour/CCT wall panel, T2 single-colour/CCT 230 V panel, K1 single-colour panel, FUT087 single-colour panel, S1-B / S1-W / S1-G and the WL-Box1 2.4G gateway. The controller relays the remote signal (another 30 m per device).
Technical data
- Model: Mi-Light / MiBoxer PW2 (2 in 1 LED Controller, WiFi + 2.4G)
- Input voltage: 12–48 V DC
- Output current: 20 A max in total
- Output modes: single colour / CCT (dual white)
- Communication: WiFi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 LE, 2.4G RF (remote range up to 30 m)
- Operating temperature: −10…+40 °C
Remotes are not included. Match the power supply to the strip voltage and total load – see the PDF manual below.
See also: Controller MI-LIGHT FUT035W+ – 2 in 1 WiFi MONO / CCT LED, Drivers for LED strips
| Input voltage | 12V-48V DC |
|---|---|
| Output power | 20A |
