Fibre optic star ceiling bundle 550 × Ø 0.75 mm, 4 m – ready-made
Ready-made star ceiling fibre bundle: 550 fibres Ø 0.75 mm × 4 m (2200 m) with an end fitting for the light engine. Fits one output of the RGB+CCT 16 W light engine. Made to order.
Available on back-order
179,00 €/ setnet
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
A ready-made fibre optic star ceiling bundle: 550 fibres Ø 0.75 mm, all 4 m long, gathered into a bundle with an end fitting for the light engine. Instead of cutting fibres from a reel, you connect the bundle to the light engine and spread the fibres across the ceiling – the choice for installations where a uniform fibre length is enough.
550 fibres Ø 0.75 mm equal the capacity of one output of the RGB+CCT 16 W light engines (1 output – one bundle, 2 outputs – two bundles). Kit contents and the match to a specific light engine are confirmed in the quotation. Make sure 4 m reaches from the light engine to the farthest point of the ceiling.
Technical data
- Number of fibres: 550
- Single fibre length: 4 m
- Total fibre length: 2200 m
- Fibre diameter: Ø 0.75 mm
- Light engine compatibility: specified in the quotation (550 × Ø 0.75 mm = capacity of one 16 W light engine output)
- Use: fibre optic star ceilings indoors
- SKU: GR0926.OPT-BUNDLE.550.400
Connecting the bundle to the light engine
Schematic drawing in the gallery (connector and bundle assembly from the 16 W light engine manual). With the power disconnected, slide the bundle end into the light engine’s mounting ring and tighten the ring screw; the bundle face must be smooth and clean so that every fibre lights evenly. Details are in the manual of the chosen light engine.
Installing the fibres in the ceiling
1 – drill the holes in the ceiling, 2 – glue the fibres, 3 – cut off the excess after installation. We recommend a qualified installer for fitting and wiring.
See also: Fibre optic lighting – light engines and fibres · Fibre optic light engine RGB+CCT 16 W, 1 output – star ceiling · Fibre optic light engine RGB+CCT 16 W, 2 outputs – star ceiling · Optical fibre for star ceiling Ø 0.75 mm – 2700 m reel · Starsky Fiber-Light Pins for Starry Sky Ceilings · Guide: fibre optic star ceiling – how to choose the light engine and fibres
| Product type | ready-made bundle |
|---|---|
| Fibre diameter | 0.75 mm |
| Length | 4 m |
