Cyanoacrylate instant glue KT-40
Price per pack. Sold from 10 pcs in steps of 10.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
KT-40 cyanoacrylate instant glue from 2K-Trade
KT-40 is a one-component instant cyanoacrylate glue based on ethyl cyanoacrylate. It is clear, has a low viscosity and works especially well on hard-to-bond joints.
Apply the glue to one clean, dry surface, then press the other surface against it until the joint reaches its initial strength. Full strength is reached after 24 hours. When installing stretch ceilings it is handy for small bonding jobs, such as seals, inserts and profile parts, as long as they are made of the materials listed below.
KT-40 specifications
- ✅ Composition: ethyl cyanoacrylate
- ✅ Colour: clear
- ✅ Viscosity: 15–40 mPa·s
- ✅ Service temperature: −50 to +80 °C
- ✅ Full strength: after 24 hours
- ✅ Packs: 10 g, 20 g, 20 g with needle tip
Setting time (22 °C, 50% relative humidity)
- ✅ Neoprene, nitrile and EPDM rubber: 2–3 s
- ✅ Wood (balsa): 2 s
- ✅ Polycarbonate (PC): 6 s
- ✅ ABS: 20 s
- ✅ Steel: 20 s
Shear strength
- ✅ Steel: 18 N/mm²
- ✅ ABS: 8 N/mm²
- ✅ Polycarbonate (PC): 7 N/mm²
- ✅ Aluminium: 7 N/mm²
Storage
- ✅ Recommended temperature: 2–10 °C
- ✅ Maximum temperature: 25 °C
Safety
- Warning (GHS07)
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
- Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
- Wear protective gloves/protective clothing/eye protection/face protection.
- IF ON SKIN: wash with plenty of soap and water.
- IF INHALED: remove person to fresh air and keep comfortable for breathing.
- IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
- Store in a well-ventilated place. Keep container tightly closed.
| Capacity | 10 g, 20 g, 20 g with needle tip |
|---|
