RGBW LED Controller 2.4G RF Mi-Light PR5 5 in 1, 20A 960 W
5-in-1 LED controller on 2.4G RF: single-colour, CCT, RGB, RGBW and RGB+CCT strips from one device. 12–48 V DC, up to 20 A (960 W). Mi-Light 2.4G remotes, app via a 2.4G gateway, 18 dynamic modes.
14,00 €/ pcnet
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
The Mi-Light (MiBoxer) PR5 is an RGBW LED controller on the classic 2.4G RF radio – a 5-in-1 unit with no Zigbee or WiFi needed. One device drives single-colour, CCT, RGB, RGBW and RGB+CCT strips; the output mode is switched with the button on the housing. Up to 20 A (960 W at 48 V) and smooth 4096-level dimming with a logarithmic curve down to 0.1 % – no flicker at low brightness. 18 built-in dynamic modes (fades, colour jumps). Two-mode version (single colour / CCT): the PR2 CCT LED controller 2.4G RF; the 5-in-1 counterpart on Zigbee 3.0: the PZ5 Zigbee RGBW LED strip controller.
Ways to control it
- Mi-Light 2.4G RF remotes and wall panels – up to 30 m, one remote drives many controllers at once, zones and groups.
- App and voice – with a 2.4G gateway (WL-Box1 / WL-Box2): Tuya Smart / Smart Life, Alexa and Google.
- DMX512 – in RGB+CCT mode with the FUTD01 transmitter (sold separately).
Compatible remotes and panels (2.4G RF, purchased separately)
FUT100, FUT089S, FUT089 RGB+CCT remote / FUT089-B, FUT088, FUT092 RGB+CCT remote / FUT092-B, FUT096 RGBW remote / FUT096-B, B8 RGB+CCT wall panel, B0 RGB+CCT wall panel / B0-B, B3 / B3-B, T3, B4 RGB+CCT wall panel / B4-B, T4 RGB+CCT 230 V panel, S2W+ and the WL-Box2 gateway. The controller relays the remote signal (another 30 m per device) and synchronises dynamic modes.
Technical data
- Model: Mi-Light / MiBoxer PR5 (5 in 1 LED Controller, 2.4GHz)
- Input voltage: 12–48 V DC
- Output current: 20 A max in total, up to 960 W (constant voltage)
- Output modes: single colour / CCT / RGB / RGBW / RGB+CCT
- Control: 2.4G RF, up to 30 m
- Dimming: 4096 levels, 0.1–100 %, logarithmic curve; 18 dynamic modes
- IP20, operating temperature −10…+40 °C
- Certificates: CE (EMC, LVD, RED), 5-year manufacturer warranty
Remotes, gateway and the DMX transmitter are not included. Match the power supply to the strip voltage and total load – see the PDF manual below.
See also: Mi-Light PZ5 RGBW / RGB+CCT Zigbee 3.0 LED Controller 5 in 1, 20A, Drivers for LED strips
| Input voltage | 12V-48V DC |
|---|---|
| Output power | 20A |
