Mi-Light HPS1-RF Presence Sensor – 24 GHz Radar, 10 A Relay, 2.4G
Microwave presence sensor: the 24 GHz radar also reacts to the breathing of a person sitting still. Built-in 10 A relay (AC 100–240 V) or control of Mi-Light lamps over 2.4G; several sensors join into a network.
13,20 €/ pcnet
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
The Mi-Light (MiBoxer) HPS1-RF is a microwave presence sensor with a 24 GHz radar. It detects not only movement but also the small movements of a seated person, such as breathing, so the light stays on while someone works at a desk. A lamp can be wired straight to the built-in relay, or Mi-Light / MiBoxer 2.4G series lighting can be controlled by radio.
Functions
- ✅ Detects a person who is not moving.
- ✅ Detection range 3–8 m, set with a DIP switch; 120° angle.
- ✅ Built-in relay: AC 100–240 V output, up to 10 A.
- ✅ Standalone or networked: a master and slave sensors link over 2.4G, a detection by any of them switches the whole network, with no blind spots.
- ✅ Switch-off delay after the person leaves: 1, 3 or 10 min, set on the master sensor.
- ✅ Only the master sensor is paired with the Mi-Light lighting.
Specifications
- Input and output: AC 100–240 V, 50/60 Hz
- Output current: up to 10 A
- Radar frequency: 24 GHz
- Detection range: 3–8 m; movement 5–8 m, presence 4–5 m
- Detection angle: 120°
- Radio: 2.4 GHz RF, range up to 30 m
- Protection rating: IP20
- Operating temperature: -10 to 40 °C
- Certificates: CE, EMC, LVD, RED
See also: MI-LIGHT PIR-RF Sensor, Remote controls and wall panels for LED




