Zigbee Triac Dimmer Module 230 V Mi-Light TRI-C1 ZR, 300 W
Zigbee 3.0 triac dimmer for 230 V mains lamps: dimmable LED, halogen, incandescent, up to 300 W. App control via a Zigbee gateway (Tuya, Hue, TRÅDFRI), voice, Mi-Light 2.4G remotes and a PUSH button. Fits a wall box.
16,00 €/ pcnet
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
The Mi-Light (MiBoxer) TRI-C1 ZR is a Zigbee triac dimmer module for 230 V mains lighting: dimmable LED bulbs, halogen and classic incandescent lamps. The module fits in the flush-mount box behind the existing switch and also carries a 2.4G RF receiver and a PUSH input. Trailing-edge phase dimming; the Min. Set button defines the flicker-free minimum brightness. Built-in temperature and overload protection. Version without Zigbee, 2.4G + PUSH only: push dimmer module TRI-C1.
Ways to control it
- App and voice – through a Zigbee 3.0 gateway (MiBoxer, Tuya Smart / Smart Life); Alexa / Google voice control, schedules, groups. Works with Zigbee 3.0 ecosystems: Philips Hue, IKEA TRÅDFRI, Amazon Echo Plus.
- Mi-Light 2.4G RF remotes and wall panels – up to 30 m, groups and zones.
- PUSH button – short press on/off, long press dims; any momentary switch on the PUSH terminals.
Compatible remotes and panels (2.4G RF, purchased separately)
FUT007 remote, FUT006, B1 wall panel, T1 panel (230 V), B2 panel, T2 panel (230 V), K1 panel, FUT087 panel, S1-B / S1-W / S1-G and the WL-Box1 2.4G gateway. Zigbee 3.0 gateways from our range: ZB-BOX2 wired Zigbee 3.0 gateway, ZB-BOX3 multimode gateway.
Technical data
- Model: Mi-Light / MiBoxer TRI-C1ZR (AC Triac Dimmer, Zigbee 3.0 + 2.4G + Push)
- Input / output voltage: 100–240 V~, 50/60 Hz
- Output current: max 1.36 A; 150 W at 110 V / 300 W at 220 V
- Load: dimmable LED, halogen, incandescent (phase-cut, trailing edge)
- Communication: Zigbee 3.0 (IEEE 802.15.4, 2.400–2.480 GHz, up to 100 m open area) + 2.4G RF (up to 30 m) + PUSH
- Protection: temperature, overload; operating temperature −10…+40 °C; flush-mount box installation
Zigbee gateway and remotes are not included. The 230 V connection should be made by an electrician – wiring diagram in the PDF manual below.
See also: Mi-Light PZ5 RGBW / RGB+CCT Zigbee 3.0 LED Controller 5 in 1, 20A, Dimmers
| Output power | 300W |
|---|
