Push Dimmer Module 230 V Triac Mi-Light TRI-C1, 300 W
Triac dimmer for 230 V mains lamps: dimmable LED, halogen, incandescent. Up to 300 W (1.36 A), controlled by Mi-Light 2.4G remotes and a PUSH button, adjustable minimum brightness. Fits a flush-mount wall box.
15,50 €/ pcnet
The message will already contain this product's name and code.
*The prices shown are for information purposes only and do not constitute a commercial offer within the meaning of Art. 66 §1 of the Civil Code of the Republic of Poland. The exact quotation is always determined individually after a request for quotation has been submitted and reviewed, or after an inquiry sent directly by email.
The Mi-Light (MiBoxer) TRI-C1 is a push dimmer module for 230 V mains lighting – a triac dimmer for dimmable LED bulbs, halogen and classic incandescent lamps. The module hides in the flush-mount box behind the existing switch, and brightness is set with a Mi-Light 2.4G remote or an ordinary momentary (PUSH) button. Trailing-edge phase dimming works with most dimmable LEDs; the Min. Set button defines the minimum brightness below which the lamp would flicker. Built-in temperature and overload protection. Zigbee 3.0 version of this module: Zigbee triac dimmer module TRI-C1 ZR.
Ways to control it
- Mi-Light 2.4G RF remotes and wall panels – up to 30 m, one remote drives many dimmers (groups, zones).
- PUSH button – short press on/off, long press dims; any momentary switch wired to the PUSH terminals.
- App and voice – with a 2.4G gateway (WL-Box1): Tuya Smart / Smart Life, Alexa and Google.
Compatible remotes and panels (2.4G RF, purchased separately)
FUT007 remote, FUT006, B1 wall panel, T1 panel (230 V), B2 panel, T2 panel (230 V), K1 panel, FUT087 panel, S1-B / S1-W / S1-G and the WL-Box1 2.4G gateway. The dimmer relays the remote signal to further receivers.
Technical data
- Model: Mi-Light / MiBoxer TRI-C1 (AC Triac Dimmer, 2.4G + Push)
- Input / output voltage: 100–240 V~, 50/60 Hz
- Output current: max 1.36 A; 150 W at 110 V / 300 W at 220 V
- Load: dimmable LED, halogen, incandescent (phase-cut, trailing edge)
- Control: 2.4G RF (up to 30 m) + PUSH; adjustable minimum brightness
- Protection: temperature, overload
- Operating temperature −10…+40 °C; flush-mount box installation
Zigbee 3.0 version of this dimmer: TRI-C1 ZR. Remotes are not included. The 230 V connection should be made by an electrician – wiring diagram in the PDF manual below.
See also: MI-LIGHT T1 MONO wall panel (230V), Dimmers
| Output power | 300W |
|---|
